BookDrive Mini Software Manual
From Atiz Support Wiki
Revision as of 09:20, 3 July 2009 Noppadol (Talk | contribs) ← Previous diff |
Current revision Noppadol (Talk | contribs) |
||
Line 11: | Line 11: | ||
- | [[Image:software_2_1.png]] | + | [[Image:software_2_1_1.jpg]] |
Current revision
How to set up the software
The following picture summarizes the key differences of Single PC Mode VS. Dual PC Mode
Workflow comparison
Installing the Software
Step1:
Make sure you've successfully installed Canon drivers and software that come with the cameras. Do not proceed to next step if you still can't do PC remote shooting using the Canon software.
Step2:
The software that you have to install is based on the mode that you want to run.
- For Single PC mode, install BookDrive Capture and BookDrive Editor Pro on the Master PC.
- For Dual PC mode, install BookDrive Capture and BookDrive Editor Pro on the Master PC and install Capture Slave on the Slave PC.
Step3:
To install, close any running program, insert the Atiz software CD into the computer's disc drive and select the appropriate of your installation.
You will not find this screen if you download the software directly on Atiz website.
The appropriate programs will be pre-selected for installation based on the installation mode you selected.
IMPORTANT: If you are going to run Dual PC mode, do not forget to install
Capture Slave on the Slave PC.
Step4:
Once finished, the shortcuts to the programs(on the Master PC, BookDrive Capture and BookDrive Editor Pro will appear on your desktop)
Steps to activate the software
Next step is to separately activate BookDrive Capture and BookDrive Editor Pro software.
Without activation, the program will be in trial mode and expire in 15 days.
Step1:
To activate BookDrive Capture, open the program. You will see the Product Registration dialog.
Step2:
Please locate your Registration Code for BookDrive Capture in the Warranty Card and fill it in the dialog.
Step3:
Click Get Activation code from the Internet.
Step4:
You will be redirected to an Atiz web page. Please fill your information and click Submit.
Atiz will use this info to contact you in the future when software upgrades are available.
Step5:
If the Registration Code is correct, the page will give you the Activation Code.
Please contact support@atiz.com if the page does not give you the Activation Code or if you have other activation problems.
Step6:
Copy that Activation Code and paste it on the Registration window.
Step7:
Click Activate and the program will activate successfully.
Please contact support@atiz.com if the activation is not successful.
Step8:
Now you are done with the activation of BookDrive Capture. Repeat step 1-7 to activate BookDrive Editor Pro.
Setting up for Dual PC mode for the first time
1.Open Capture Slave on the Slave PC.
2.First, we need to do a network setting at the Slave PC.
For Vista --Start/Control Panel/Network and Sharing Center
3.Select Manage network connections.
4.Right click at the Local Area Connection and Select Properties.
5.Select Internet Protocal Version4(TCP/IP) and click Properties
6.Select Use the following IP address: and fill the number 192.168.1.2
7.At this point, the setting at the Slave PC is done. You can proceed to do a set upon the Master PC.
8.You can now use the peripherals from the Slave PC to use with the Master PC. You may need 2 computers. But only 1 set of monitor , keyboard and mouse use enough.
9.It's time to configure network setting on the Master PC. The procedure is similar to what you just did on the Slave PC. But this time, instead of setting the IP value as 192.168.1.2 as you did in the Slave PC, on Master PC, It has to be 192.168.1.1
10.Now on the Master PC, let's check if the Master PC can communicate with the Slave PC properly.
11.If the communication is a success, you will get a reply like this:
If the communication attempt is not successful, It's will show Request timed out:
12.Click Start,type cmd and Enter.
13.Type ping 192.168.1.2
14.After you have installed the BDC Master and have checked that the communication with the Slave PC is successful, now you are ready to do a simultaneous shooting.
Open the BookDrive Capture program on the Master PC.
15.Click Tools and Settings
Select Use the following address and fill in 192.168.1.2 and OK.
16.Click the networked camera icon.
17.BookDrive Capture on the Master PC will attempt to connect with Capture Slave on the Slave PC.
Once the network communication is successful, it will show Connected
18.Connect the camera on the right(pointing toward the left page) to the Master PC , and connect the camera on the left(pointing toward the right page) to the Slave PC.
Turn on both cameras.
19.BookDrive Capture should be able to detect both cameras as shown here.
20.Click the Capture button to fire up shooting!